Apron space is the space between the loading platform and the nearest obstruction. Apron space includes the parking area where the truck parks at the dock and the maneuvering area, which is the area the truck uses to maneuver in and out of the parking area (Figure 5) and (Figure 6).
What is a dock approach?
Level Dock Approach
The best approach is a slight inclined approach that allows water to run-off away from the building, this also diverts water run-off from the top of the trailer and away from the dock door which helps prevent water damage to products at the loading dock.
What is the standard loading dock height?
Typical loading dock heights range from 48 to 52 in, but, depending on the needs of the facility, they may be as high as 55 inches.
What are the different types of loading docks?
5 Different Types of Loading Docks
Flush Dock. The most common loading dock used in transport or heavy lifting, a flush dock allows for the back of the loading truck to be flush against the entryway of a space. Open Dock. Saw Tooth Dock. Enclosed Dock.
What is apron PPE?
Aprons, when required, must be made of chemical-resistant material and cover the front of the body from mid-chest to the knees. It is a good idea to wear an apron whenever mixing or loading chemicals or cleaning spray equipment, even when not required on the pesticide label.
What is the function of apron?
Aprons are used in restaurants for many purposes, but its main purpose is to protect you from getting spills and stains on your clothes. Aprons are also used for cleaning your hands, as you won’t go wash your hands every time you’ve touched something. Aprons are also used by businesses for employee identification.
What is a dock well?
A dock well is commonly used to provide dock-high truck loading for a grade-level warehouse.
What is a loading dock apron?
Loading dock apron space is the area required to maneuver and position trailers into place at the loading dock. Planning the loading dock apron space requires recognizing the amount of trailer movement and the amount of room it takes to achieve that movement.
How long are loading docks?
The highest internal height for product loading is approximately 114″ high. Depending on the application, there are three basic door heights that are typically specified. Keep in mind that the common dock height is 48″ – 52″.
How do I know if my truck is dock height?
A dock height truck is a truck that measures approximately 55 inches from the ground to its trailer bed. It can also be defined as a truck with a trailer that is roughly the same height as the trailer loading dock in most warehouses.
What is the maximum slope for a truck at a loading dock?
If heavy loads will be handled, slope should be no more than 3-5%. However, if space does not permit, you may increase the slope to an absolute maximum of 10%, and this will work only for light loads. Steep slopes force dock workers to load on an incline inside the truck and may cause loads to topple.
How wide should a dock be?
Common dock door dimensions are 8’0″ in width with 8 ft, 9 ft or 10 ft heights. Consider extending the door 13 ft to 14 ft above the driveway and a minimum of 8’6″ wide if full access to the truck’s interior is required.
What are 4 types of docks?
Types of Removable Docks
Floating Docks. Floating docks are large platforms, often decking placed over airtight drums, that float on the water’s surface. Piling Docks. Pipe Docks. Crib Docks. Suspension Docks. Wood Docks. Aluminum Docks. Plastic Docks.
What is a pony dock?
The dock consists of the muscles and skin covering the coccygeal vertebrae. The term “skirt” refers to the long hairs that fall below the dock. On a horse, long, thick tail hairs begin to grow at the base of the tail, and grow along the top and sides of the dock.
What is a flush dock?
A flush dock is the most common type of loading dock. In this case, the dock just acts as an opening flush with the warehouse wall, which allows the back of the truck to attach seamlessly to the dock. Flush docks save space because they neither jut out nor require an enclosure for the vehicle.
Do you remove aprons or gloves first?
The type of PPE used will vary based on the type of exposure anticipated, and not all items of PPE will be required. The order for putting on PPE is Apron or Gown, Surgical Mask, Eye Protection (where required) and Gloves. The order for removing PPE is Gloves, Apron or Gown, Eye Protection, Surgical Mask.
Can plastic aprons be reused?
The new guidance says in some situations disposable gowns could be reused, with single use of such items reserved for the most high risk procedures. Plastic aprons could be used, along with non-fluid repellant gowns, if standard kit has run out, the advice says.
