Press the button for that dedicated key to activate and deactivate the Control Lock. To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds.
How do I get the Control Lock off my washing machine?
Select and hold END OF CYCLE SIGNAL for 3 seconds. The CONTROL LOCKED status light glows. Select and hold END OF CYCLE SIGNAL for 3 seconds until the CONTROL LOCKED Status light turns off. I hope this is helpful.
How do you unlock the control panel on a Whirlpool washing machine?
If you do not see the 3-2-1 countdown and are unable to de-activate Control Lock, try pressing the POWER button first, then touch and hold 3 seconds to de-activate control lock. If this does not work, try unplugging the machine or turning off the breaker for 1 minute, then power the machine back on and try again.
How do you unlock the control panel on a Whirlpool washer?
How do you unlock a Whirlpool front load washer? Hold down the “Control Lock” button on your Whirlpool washer for three seconds at the end of the washing cycle. Listen, and when you hear the unlatching sound, the door should open.
What is control locked on Whirlpool washer?
Whirlpool Duet washing machines have locking control panels that prevent the washer from responding to pressed buttons, ensuring that the appliance cannot be accidentally turned on. When you are ready to resume use of the washer, you must first unlock the control panel.
Why is my washer locked and won’t open?
The most common cause is water left in the machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray). The door interlock has simply jammed.
How do I reset the control panel on my Whirlpool washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.
