The filter or trap is generally located inside the machine’s agitator.
How do I clean the filter on my Maytag top load washer?
The quickest way to clean out your filter is to remove it from the unit and soak it in hot water, loosening any clog or trapped residue. If the filter cannot be removed, clean it out with brush. Some filters are disposable, so instead of cleaning them you can just throw them away and put a new one in place.
Does a Maytag washer have a drain filter?
Cleaning the Drain Pump Filter/Draining Residual Water on your Maytag Front Load Washer. NOTE: Perform the following procedure occasionally or every 6 months. Open the dispenser drawer by pulling on the handle at the base of the washer. This will reveal the drain pump filter.
Do top loading washing machines have a filter?
“Top loaders tend to have filters on the valves,” said Amber Peabody, Service Manager at Dunnett Inc. The valve filters sift the water going in and out of the pump and hoses. If you do happen to have a removable filter, consult your owner’s manual on how to properly remove it.
Where is the filter on a top load washing machine?
Top Load Washer – Lint / Pump Filters
There are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket under the agitator. During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.These filters should never require cleaning or replacement.
Where is washing machine filter located?
The filter is either obvious at the front, or hidden behind the kick-strip at the front of the washing machine (if fitted). Be careful because they are often flimsy and brittle, and therefore break easily.
