You may find a few suppliers that have them in stock. If you can’t find any readily available 24-foot long decking boards, there are still a few options you can try. Some composite decking manufacturers offer custom length boards. You only need to give them a call and request boards with your preferred lengths.
Does composite decking come in 10 lengths?
Composite decking size refers to the length and width of the boards used for deck building and repairs. Most manufacturers offer composite decking boards in 12′, 16′ and 20′ lengths.
What widths does Trex come in?
2 x 6 boards available in 12′, 16′, and 20′ lengths.
Can Trex decking span 24 inches?
Most composite and PVC decking brands, like Trex and Azek, recommend a maximum joist spacing of 16 inches OC. Some brands, like WearDeck, let you get away with more – reinforced with a layer of fiberglass on both the top and bottom, WearDeck boards easily allow for spans of 24 inches OC.
What lengths can you get composite decking in?
The length of composite decking boards comes in 6′, 12′, 16′ and up to 20′. The width of the composite board also varies and can range from 1 to 2 inches thick and 4 to 6 inches wide.
What is the longest length of Trex decking?
2 x 6 boards available in 12′, 16′, and 20′ lengths.
Does Trex decking come in 14 foot lengths?
Choose from 8, 12, 16 or 20 ft board lengths. Choose which board best fits the dimensions of the deck.
Is Trex capped on 4 sides?
With Trex, all deck boards feature only 3-sided capping. That translates to lower materials cost compared to 4-sided or fully synthetic boards, and therefore a lower cost-per-board.
What lengths does Trex Transcend come in?
Trex Transcend Deck Boards are available in 12-foot and 16-foot lengths. Choose from the eye-catching finishes of Gravel Path, Havana Gold, Island Mist, Lava Rock, Rope Swing, Spiced Rum, Tiki Torch, and Vintage Lantern.
What is the gap between Trex boards?
All deck boards must always be installed with a 6mm side-to-side gap. The Trex Hideaway Hidden Fasteners automatically measure the 6mm gap between grooved edge boards but you must still ensure the 6mm gap with the square edge boards.
Can you put a firepit on a Trex deck?
You should not place your fire pit directly on your composite decking. Trex decking can soften and become damaged at temperatures as low as 176F. A temperature barrier can be bricks, stone or ceramic tiles or fire mats. If you are putting a wood burning fire pit on composite decking you need to be much more careful.
What is the difference between Trex Select and transcend?
The surface of Trex’s Select line has a different look than Enhance or Transcend. Instead of the wood-streaking look, Select features a textured wood-grain look on the surface of the board, without the deeper grooves of Enhance or Transcend.
Do you gap Trex decking?
You must gap Trex® decking, both end-to-end and width-to-width. Gapping is necessary for drainage and the slight thermal expansion and contraction of Trex decking boards. Gapping also allows for the shrinkage of the wood joist system.
How far apart do joists need to be for composite decking?
Most composite decking materials, like Trex, AZEK, TimberTech and Fiberon composite decking, require minimum joist spacing for composite decking at 16″ on-center spacing for straight decking and 12″ on-center joist spacing for 45-degree angle diagonal decking.
How far can 5 4 decking span?
Decking boards span from joist to joist. If you use 5/4 decking, joists must be no farther apart than 16 inches. Decking made of 2x4s or 2x6s can span up to 24 inches. If you will run decking at an angle, you might need to put the joists closer together.
What’s the longest deck board?
Length: When possible, buy decking that can run the full length of your deck. All lumberyards and home centers carry 16-ft. deck boards, but many also stock or can order 20- and 24-ft. boards, though they may cost more.
What length deck boards should I use?
Most decks are built with 16 and 20 foot boards, but those popular lengths come at a premium price. Using shorter length boards (8-14 foot) can save you up to $2.35 per square foot, sometimes more if you’re using a hardwood like ipe. That means on an average sized deck (430 sq. ft.)
