This type of fitting is easy to install and is less prone to leaking than a saddle valve. In most cases, the water line can be run from a kitchen faucet water supply line through the kitchen cabinets and over to the refrigerator.
Are refrigerator water lines Universal?
Tubing Sizes
Most flexible plastic water lines for refrigerators come with outside diameters of either 1/4 inch or 5/16 inch, reveals Darrin’s Plumbing Tips. Check your refrigerator’s owner’s manual or the manufacturer’s website for the recommended size and type of water line for your unit.
How do I connect the water line to my PVC ice maker?
Attach the fitting to the PVC pipe with PVC cement. Coat the inside of the PVC pipe and the outside of the fitting with the cement, insert and press them together. Insert the barbed end of the fitting into the plastic pipe, then clamp it securely with a hose clamp and a screwdriver.
Can I use plastic tubing for ice maker?
Answer: You’re right to be concerned, because plastic tubing to an ice maker is susceptible to cracking and splitting. The constant flow of hot air from the compressor fan in the essentially unventilated space behind the fridge blows over and around the tubing — and eventually makes it quite brittle.
How much does it cost to install a water line for a refrigerator?
A typical water line costs between $65 and $170 to run. The cost to install a basic refrigerator on a first floor kitchen with a water line is about $250. If you need an electrical outlet installed by an electrician, you’ll need to pay an average of $220-$750 per outlet.
How far can you run a water line for a refrigerator?
There is no maximum length, you can run the line as long as needed to reach a main water line. You can also use 1/4″ O.D. (outside dimension) copper tubing with a flared end, approximately 8 ft coiled into 3 turns that are 10″ in diameter.
Can a fridge make ice without a water line?
Although it’s convenient to get water and ice directly from the refrigerator, purchasing a refrigerator without a water line or reservoir doesn’t mean you can’t have homemade ice or chilled and filtered water. Ice cube trays require minimum effort to fill with water, freeze and extract.
How do you fix a leaking refrigerator water line?
If you need to fix a refrigerator water line leak in copper tubing, the steps are basically the same as repairing a plastic water line. Identify the damaged length of line, remove it with a tubing cutter, and replace it with copper tubing secured with brass unions at each end of the fix.
What size is the waterline on a Whirlpool refrigerator?
This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may need to be cut. This water tube transports water to the ice and water dispensers.
Why does my fridge have 2 water lines?
Most likely the second tube is a drip tray drain line.
